Artificial turfs come with installation instructions and offers from suppliers. These offers are likely to increase the cost of laying the turf. If you need to reduce your expenses and still achieve a perfect artificial yard, there are simple steps to follow. The DIY procedure for synthetic putting greens installation gives you an all weather compound that is sensitive to the slopes and contours within your compound.
Measurements of the compound or area to be covered should be taken using available tools. The tools include locally available threads and hose where tape measures are inaccessible. The measurements determine the size of turf to buy. Ensure that your lengths and widths follow the nearest and longest straight line possible.
Measurements taken on the ground should be transferred to a paper in order to get a comprehensive design of the area. The design should bear in mind the size and shape of your compound in order to device a way of utilizing every available space. The total surface area to be covered determines the size of turf you will buy. There are extensions to accommodate unique needs.
During design, it is essential to consider drainage. It will keep your area from floods that lender the surface impossible to use. It will make your artificial grass useless after a heavy downpour. A special spray or chalk is used to mark edges and corners indicating boundaries.
There are two options when laying your green in Seattle, WA. It is either above the ground or in-ground. Preparations involve leveling and scoping sods with such locally available tools as sod cutter and shovel. The area from where sod has been scoped is then pounded with the aim of leveling. Wood chippings and stones are removed to create an even and solid surface.
By pounding the surface, you will make it firm and ready for the laying of the weed barrier. The weed barrier intervenes between the soil and the base material. The base material will be poured on it. The material is kept in place using firm edging that can survive the pressure of pounding.
A surface that is effectively pounded will make it easier to lay the turf. It is solid and consistent to produce reliable results. Drainage channels are designed for the edges to prevent damage on the base material. Placing the channels in the middle affects the firmness of the surface below because it gets water logged. This will be a disastrous fault on the putting.
The slope that facilitates effective drainage is achieved by slanting the surface by an inch for every ten to fifteen feet. Contours are easy to achieve on areas where they are needed. They must be developed without compromising on the solidness of the base. You have the freedom to generate contours of any design.
Synthetic turfs are sold with instructions on how to install them. The instructions are easy to follow in a way that will help you reduce the cost of hiring contractors. You will enjoy the challenge when you DIY as well as save time and money. This is an ideal project for your vacation and ensures that you improve the appearance of your yard without spending much money.
Read more about 8 Tips For DIY Synthetic Putting Greens Installation.