Artificial grass or turf is synthetic grass commonly laid on lawns or football pitches. It is a convenient option because you do not have to go through the hassles of planting real grass and then waiting for it to grow. This turf is also not susceptible to adverse weather conditions such as extreme heat that will cause it to wilt and eventually dry up like in the case of the real grass. Below are some guidelines on how to go about artificial turf installation Seattle.
Begin by getting a rope or a hose to act as a border of the area you intend to install your grass. You can experiment with different locations at different times of day to find your optimum spot. Choose the design you want for your lawn but put into consideration that the artificial grass comes in a rectangular shape with a width of about 3.7 meters. Your design should be one that you can easily cut from the main turf.
Ensure you have sufficient material to complete the task. There should be enough adhesive, synthetic turf as well as backing tape. Sketch a map of the area you wish to cover with the synthetic turf to scale so as to get an idea of how it will look like finished. Ensure to have all the blades of grass laid on your lawn facing one direction, this is especially relevant for areas where smaller pieces will need to be added.
Before the laying of the grass begins, a proper base should first be prepared. If you have a concrete lawn, then you can begin from there. If not, you are going to need a compacted dust base. The thickness of the dust should be no less than 50 millimeters. If you have clay or is sandy, then you are going to need a thicker base. The base should be free of all stones and similar object so as to give it a smooth finish when complete.
After finishing the base, start rolling out the synthetic turf away from where you begin. Cut the turf one piece at a time depending on where they need to go. In those areas that will need additional smaller pieces, they should be laid with the blades all facing one direction. The grass should go around trees, landscaping obstacles and flowerbeds.
In instances where an area is larger than 3.7 meters, you will have to join the pieces using adhesive or tape. The seams you make should not be visible in plain sight. It should seem seamless at first glance. Begin inspecting your work for any mistakes before you proceed because it will be difficult to make any further changes once you are past this step.
Once you are satisfied with the condition of the lawn, you can begin installing the fill material. There are some grass types that do not need this material so make sure you check first. Begin with spreading the sand first, the sand should be sprinkled on as opposed to being dumped out in piles. Begin spreading the sand against the grain with a broom to spread it evenly across the lawn.
You can now begin spreading the rubber. This should be done in the same manner as was done with the sand. Be sure to use a broom with tough bristles to get the job done properly. This fill should compact well over time with regular use. The artificial turf installation Seattle process is now complete and you can begin enjoying it with very little maintenance.
The homepage at www.syntheticturfnorthwest.com offers info on artificial turf installation Seattle locals require for all their lawn needs. For more details check out this link http://www.syntheticturfnorthwest.com today.