If you live in a house with a faulty wooden window, then you agree that there are few things that could be more frustrating than a window that simply refuses to open. It could be due to some mechanical problems or even that the window is jammed because it has been caused to lean 12 degrees to its right due to subsidence. Whichever the reason, the solution normally seems beyond your understanding. It is therefore very important to know how to mend sash windows.
Since the mending is not the easiest of tasks when it comes to home improvement, you will find that people tend to delay the repair of their window. The window should be fixed since if left like that, it could present some problems especially if the fault is occurring in the kids room. For starters, kids, once they run out of curved tracks, kids can try to pull the window. This can be catastrophic.
But the idea of you doing all the repairing and replacing may appear too challenging especially if you are interacting with it for the first time. But if you are able to learn the methods of going about it, you may be saving a lot of money. Firstly, you need to start by finding out the part which is faulty. It is just like when you learn DIY painting.
Most people think that by locating the problem, they can just walk in the shop and buy the faulty part and have it replaced. Sadly though, the problem is not as straightforward as it may appear. In theory, you just need to buy the broken cord and replace it. In practice however, you may not even know how to get off the faulty window.
Your next step involves the removal of the lower window. Luckily for you, this process is not as involving as many people fear. There are some two strips of which are thin and which serve the purpose of stopping the lower sash from falling back inside the room. Ordinarily, they appear as if they are part and parcel of the window. The truth is that they are detached from it. These vertical strips, if removed either in pieces or wholly, ease the process of removing the lower sashes.
Removing of weights is your next step. To locate the compartment in which these weights are hidden, you should look in the either side of the window frames. You can access these through a panel of wood which are also known as pocket. The sash weights are located behind each pocket. This is a piece of advice property owners need.
The next step involves fixing to the weights the new cords. This can be done through leading the cord that is in the top part of the weight and consequently out through its side. To prevent it from pulling back, a stop knot should be tied at its end.
Finally, there is replacement of the lower sash. If there is any excess cord, it needs to be cut off using a sharp knife. Then, it should be returned to its place. The above are the methods that if followed properly, will ensure that you have the requisite knowledge of mending sash windows. In the long run, you will also be decorating your home.
If you want the best sash window restoration service in London, check out this site. Complete details on The Wooden Window Workshop can be found at http://www.sashwindowrepairs-london.co.uk/default.html today.